Metal splinters and Welding burns....

Been a while since the last update, I've had a few ups and down with the car over the last two weeks.

• The weld nuts arrived and were duly welded to the harness mounts.


• The head lamp brackets were welded on and then the dreaded re design of the rear roll bar braces.

Take a look at the two pics to see the difference, Original "Book" on left redesign on Right

just need to knock the rear suspension back on and plan the positions of the rear brake flexi pipe mounts and the fuel pump and regulator brakets before clearing out the workshop and sheeting it up ready for painting next weekend.